Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Venice
Salt air gets to chimneys here before anything else does. If your damper sticks, your firebox floor is crumbling, or your gas insert won’t light, you’re dealing with a repair problem that’s shaped by where you live, not just by how old the fireplace is. We know the beach bungalows off Oxford and Dell, the cottage courts on the tight lots near Abbot Kinney, and the canal homes where original masonry chimneys sit a few blocks from the water. That local understanding matters when we diagnose what’s actually failing. Call (866) 490-9807 and we’ll book a visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Venice Homeowners Call Westchester Chimney Sweep Pros for Fireplace Repair
We’re a chimney specialist, not a multi-trade generalist, and that matters when a repair requires trade-level materials knowledge rather than a hardware-store guess. Our technicians have up to 15 years of experience, and we work exclusively with professional-tier products – HeatShield, Gelco, Olympia Chimney, Famco – the same materials chimney engineers specify. Every repair estimate is free, and the written estimate sets the final price.
We serve Venice and the neighborhoods around it regularly, so we know the coastal conditions that drive fireplace damage near the beach. The salt spray and marine-layer damp that reach a cottage court in the Canal area are simply not the same as what a home further inland sees. That gap changes what fails first and what we recommend. Nothing gets recommended without photo or camera evidence you can look at yourself, and we’ll say plainly when a repair can safely wait.
Our fireplace work sits under one roof with our inspection, sweep, cap and crown, and chimney repair services. That means no handoffs and no subcontractors on your repair.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Venice
Damper Repair
Rusted dampers and damper frames that no longer seal are one of the first things we find in original 1920s-40s Venice bungalows. Constant salt air attacks the metal, and a damper that won’t close means poor draft and heat you’re paying for that goes straight up the flue. We often replace these with stainless-steel models built to resist corrosion in coastal conditions.

Firebox Repair
Spalling firebox brick and eroded mortar joints get misdiagnosed as needing only a cleaning. What’s actually happening is years of marine-layer moisture and salt deposits working on the mortar and metal. We rebuild fireboxes with refractory mortar, so the repair holds up to the damp that’s coming whether or not you light a fire.

Fireplace Insert Service
Many Venice homes have been converted to gas inserts, and those inserts need service too – from a pilot light that won’t stay lit to a unit that needs reseating. We service inserts and their surrounding firebox together, because an insert in a spalling firebox is only half a repair.

Gas and Wood Burning Fireplace Repair
Gas and wood appliances have different failure patterns. A gas unit often shows up as a pilot or ignition problem, while wood-burning fireplaces show physical damage to brick, mortar, and flue tiles. We diagnose both, and our fireplace repair work covers the full appliance.
Trusted Brands We Service in Venice
We’re trained on and specify HeatShield, Gelco, Olympia Chimney, and Famco for our repair work. HeatShield lets us resurface a deteriorated flue without a full reline in the right situation. We don’t claim to stock parts for every brand, but our material selection comes from the trade ecosystem, not consumer retail. That’s the difference that lets us turn around a repair with the right component rather than a substitute. When a fireplace calls for a specific part, we source the correct professional-grade one.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Venice Homes
- Rusted dampers and damper frames. These no longer seal, which gives you poor draft and energy loss. It’s the standard finding in original beach bungalows that live with constant salt air.
- Spalling firebox brick and eroded mortar joints. Marine-layer moisture and salt deposits break down mortar over the years. It’s often mistaken for a job that only needs a cleaning.
- Cracked clay flue tiles. Salt-air spalling and thermal stress crack original tiles, which lets creosote or moisture reach the chimney structure. Left alone, that can turn into a relining job.
- Corroded caps and crowns. The cap and crown on a coastal chimney take the salt spray first. A cracked crown lets water in, and a rusted cap stops doing its job of keeping weather out.
Pricing for Fireplace Repair in Venice, CA
These are typical ranges for the Venice market, not a firm quote – the written estimate sets the final price. A routine damper repair in Venice usually runs $180-$340. Firebox repair with refractory mortar typically falls in the $600-$1,500 range, depending on how much brick needs rebuilding. A fireplace insert service or reseating runs about $150-$350, and a gas pilot light repair is commonly $125-$275. Chimney cap and crown work, which matters most on the coast, runs $250-$600. Salt-air damage near the beach often pushes a job toward the higher end, and we’ll show you why with photos before you commit. Estimates are free.
We Also Serve Cities Near Venice
We work across the Westside, which means we also take fireplace repair calls in Marina del Rey, Mar Vista, Culver City, and Westchester. The conditions shift as you move inland – less salt, but the same aging masonry – and we adjust the diagnosis to match. If you’re near any of these areas, call us and we’ll talk through your fireplace.
Serving Venice, CA – Our Local Coverage Area
We serve Venice and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Venice
Salt air is the cause. Venice’s marine layer keeps damp salt deposits on metal components for much of the year, so a standard steel damper corrodes much faster here than inland. That’s why we often recommend a stainless-steel replacement. Call (866) 490-9807 for a free estimate.
Once a year, even if you seldom light it. The inspection here isn’t chasing creosote so much as catching salt-air corrosion, spalling brick, and cracked flue tiles early. A good time to book is after the first fall Santa Ana wind event, when loose caps and rusted dampers become obvious. Call for an exact quote – estimates are free.
Crumbling firebox floor, loose or flaking brick, and mortar that turns sandy when you touch it. Those point to salt-laden condensation attacking the mortar, not just soot buildup. We confirm it with a Level 2 inspection and photos before recommending a rebuild.
Usually yes, provided the flue and firebox are sound first. An insert in a spalling firebox is only half a repair, so we inspect the surrounding masonry before recommending one. Many original Venice chimneys have already been converted, and we service both the insert and its firebox.
They take the salt spray before anything else, so a cracked crown or a rusted cap fails sooner here than inland. A failed crown lets water into the masonry, which is the leading source of chimney water damage. We install caps and crowns as a core part of our work, using professional-grade components. Call (866) 490-9807 for a free estimate.
If your fireplace is showing its age near the beach, the fix is usually straightforward once we’ve seen it. Call (866) 490-9807 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Westchester Chimney Sweep Pros.