Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Lennox
If you live in Lennox, the chimney on your roof is probably fighting two things at once: the marine air off the LAX coastal basin and a mortar crown that’s older than most of the cars on Lennox Boulevard. We install, replace, repair, and coat chimney caps and crowns for homeowners here, and we know why these parts fail on Lennox homes before the flue ever has a chance to clog. Our technicians have up to 15 years of experience with exactly this kind of work. Call (866) 490-9807. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Lennox Homeowners Call Westchester Chimney Sweep Pros for Chimney Cap & Crown
We’ve built a strong local reputation across Lennox by doing one thing well: telling homeowners what their chimney actually needs and what it doesn’t. A lot of the calls we get here start the same way. Someone has a stained ceiling, a cap that’s rusting apart, or a fireplace that’s been sealed up for years, and they aren’t sure whether they’re looking at a small repair or a big bill. We show the evidence before we recommend anything.
Response time to Lennox is quick. This is a small city tucked between Hawthorne and Inglewood, and we’re in the neighborhood regularly, so a booked job gets on the schedule without a long wait. Our technicians are trained on the same professional-grade product lines chimney engineers specify, including HeatShield, Gelco, Olympia Chimney, and Famco, and we use those materials here rather than hardware-store substitutes. That matters more in Lennox than in most places, because the coastal air is unforgiving to anything galvanized.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Lennox
Cap and crown work is a named service for us, not an add-on tacked onto a sweep. Here’s what we handle on Lennox roofs.
Cap Replacement
Most Lennox homes we look at still have a galvanized cap that’s been pitted and rusted through by years of salt-laden marine air. Replacing it with a stainless cap sized properly to the flue is the single best thing you can do for a coastal chimney. We measure the flue opening and match the cap to it, because a loose or undersized cap just lets water and birds in anyway.

Crown Repair
The mortar crown is the sloped cap at the very top of the stack, and on 1940s – 60s stucco tract homes around Lennox it’s usually original. When it cracks, water gets in and starts working on the clay tile liner underneath. We rebuild failed crowns with a proper slope away from the flue so water sheds instead of pooling.

Crown Coating
Not every crown needs to come off. When the mortar is sound but the surface is spalling and chalky, a crown coating seals it and buys years of life. This is a good fit for a lot of Lennox stacks where the crown is degrading from the outside in rather than crumbling through. We’ll tell you plainly when coating is enough and when it isn’t.

Cap Installation and Custom Caps
New installation and custom fabrication cover the odd sizes. Many Lennox fireplaces have narrow original flues, and a stock cap won’t sit right on them. We also fit multi-flue caps where two flues share a stack.
Trusted Brands We Service in Lennox
We work with the professional-tier chimney brands: HeatShield for flue resurfacing, Gelco and Olympia Chimney for caps and related components, and Famco where the fit calls for it. These are the materials specified by certified chimney engineers, and they hold up to coastal exposure in a way that consumer-grade parts don’t. We don’t claim to keep a warehouse of parts on hand. What we do is spec the right component for your flue and get it installed properly, with a turnaround that keeps a small repair from turning into a season-long wait.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Lennox Homes
Lennox sits in the LAX coastal basin, where marine air and morning dampness keep masonry cool and sometimes wet. That combination pushes exterior stacks toward spalling and efflorescence. The result is that caps and crowns here corrode and crack from the outside in, decades before the flue ever clogs. It’s a corrosion problem more than a creosote one.
- Galvanized caps rusting through. Salt-laden marine air pits a galvanized cap until it fails, and then rain runs straight down onto the crown below. Stainless holds up far better on a coastal roof.
- Original mortar crowns cracking and spalling. Coastal damp and cool masonry work on a 60- to 80-year-old crown until it cracks, exposing the clay tile liner. Left alone, that’s how water gets into the flue.
- Disintegrated flashing at the stack base. On 1940s – 60s stucco homes, the flashing where the chimney meets the roof often fails before anything else, letting water track into the attic or a ceiling below.
- Sealed fireplaces hiding surprises. Plenty of Lennox fireplaces have been boarded up for years over earthquake or smog-burning concerns. Behind a makeshift cover, a technician routinely finds a disconnected gas line or an old bird nest.
Here’s how a typical job on a Lennox stucco tract home usually goes. A galvanized cap has pitted and rusted through, letting rain onto a hairline-cracked mortar crown. The damp coastal cycle keeps that crown crumbling and softens the brick beneath. A qualified technician removes the failing cap, rebuilds or coats the crown with a proper slope away from the flue, re-seals the flashing at the stack base, and fits a stainless cap sized to the flue. Then comes a look inside, because of those boarded-up fireplaces. Our chimney cap & crown team handles the whole scope under one roof, with no handoffs and no subcontractors.
Pricing for Chimney Cap & Crown in Lennox, CA
Prices below are typical estimates for the Lennox market. Your written estimate sets the final price.
| Service | Typical Lennox range |
|---|---|
| Cap replacement (stainless, stock size) | $250 – $550 |
| Custom or multi-flue cap | $450 – $900 |
| Crown repair (rebuild) | $400 – $850 |
| Crown coating | $300 – $600 |
| Full cap and crown job with flashing re-seal | $700 – $1,400 |
A custom cap or a crown rebuild that turns into partial brick work pushes toward the top of these ranges. A simple coating on a sound crown sits at the low end. The estimate is free, and it’s written, so you know the number before anyone starts.
We Also Serve Cities Near Lennox
Lennox sits close to a lot of the South Bay, and we cover the surrounding cities too: Del Aire, Hawthorne, Inglewood, and Westchester. If your chimney is just over the city line, the same cap and crown work applies. Call and we’ll confirm the details for your address.
Serving Lennox, CA – Our Local Coverage Area
We serve Lennox and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Lennox
Because Lennox sits in the LAX coastal basin, where salt-laden marine air and morning dampness attack metal from the outside. Galvanized caps pit and rust through here years before they would in a drier inland city. That’s why we push stainless on coastal roofs. Call (866) 490-9807 for an exact quote, estimates are free.
It depends on whether the mortar is structurally sound or already crumbling through. A crown that’s chalky and spalling on the surface can often be coated and saved. One that’s cracked through and pulling away from the flue needs a rebuild. We look at it and tell you which one you’re facing rather than guessing over the phone.
Most Lennox fireplaces were built with narrow original flues, and a standard stock cap often doesn’t seat right. A custom-fabricated cap sized to the actual flue opening is usually the answer. We measure it on site before ordering anything.
Yes. A cracked crown lets water into the flue and the brick, and from there it can travel to a ceiling or attic below, especially where the flashing at the stack base has also failed. Catching the crown early is far cheaper than repairing the inside. Call (866) 490-9807 to get it looked at.
Once a year is the right interval for a coastal chimney, and it’s especially worth it on a 1940s – 60s stucco home with an original crown. The exposure here ages caps and mortar faster than inland conditions do, so an annual look catches corrosion and cracking while it’s still a small repair. Call (866) 490-9807 to book an inspection, estimates are free.
If your cap is rusting apart or your crown is crumbling, don’t wait for the next rain to find out what’s underneath. Call (866) 490-9807 for a free estimate on chimney cap and crown work in Lennox. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Westchester Chimney Sweep Pros.