Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Manhattan Beach
If your Manhattan Beach chimney cap is rusted through, dented, or crammed with palm litter, or your crown has a visible crack, we can take a look and tell you what it needs. We work with Manhattan Beach homeowners on cap installation, cap replacement, crown repair and crown coatings, using professional-grade materials rather than hardware-store substitutes. Many of the chimneys here sit on homes built in the 1950s through the 1970s, and the salt air off the Pacific is hard on metal. Our technicians have up to 15 years of experience reading exactly that kind of wear. Call (866) 490-9807 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Manhattan Beach Homeowners Call Westchester Chimney Sweep Pros for Chimney Cap & Crown
We’re a chimney specialist, not a generalist who adds a crown job between gutter repairs. That matters in a coastal town where the work is less about heavy soot and more about corrosion and debris. Homeowners in Manhattan Beach call us because we tell them plainly when a crown can be coated and when it needs rebuilding – and we show the evidence before we recommend either.
We handle the full chimney scope under one roof: inspection, sweep, cap and crown installation, fireplace repair and chimney repair. No subcontracting, no referrals out. Our technicians have up to 15 years of experience, and we work with the professional-tier product lines chimney engineers specify, including HeatShield and Gelco. When we quote a cap or crown job in Manhattan Beach, the price is set per job by the written estimate, and the estimate is free.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Manhattan Beach
Every recommendation starts with a look, not a sales pitch. We run a camera inspection and show you the photo report so you can see the cracked crown or rusted cap for yourself. Nothing gets recommended without evidence you can view on-screen.
Cap Installation in Manhattan Beach
An open flue is an invitation. Birds, bees and rats move into uncapped chimneys here, and salt spray works on the metal from the outside. We install caps sized to the actual flue opening, with screens that hold up to the fibrous palm and eucalyptus litter that drifts across the rooflines near downtown and the pier.

Cap Replacement in Manhattan Beach
Marine-layer humidity and onshore salt spray rust through dampers and chase covers faster than most homeowners expect. When a cap has corroded past patching, we replace it with a properly fitted unit from brands like Olympia Chimney or Famco. If the chase cover underneath is pitted too, that gets addressed in the same visit rather than left to leak.

Crown Repair in Manhattan Beach
The crown is the concrete cap at the top of the chimney that sheds water away from the masonry. Cracked or spalling crowns let water wick down into the smoke chamber, and on older Manhattan Beach homes those crowns were often never rebuilt. We repair the crown where it’s sound enough, and rebuild where it isn’t, always showing you the crack first.

Crown Coating in Manhattan Beach
Not every crown needs to come off. A crown with hairline cracks but solid structure can often be resurfaced with a flexible coating that seals water out and moves with the concrete. HeatShield resurfacing is one option we bring when the underlying masonry is still in good shape. We’ll say plainly when a coating will hold and when it would just be a patch over a bigger problem.
Trusted Brands We Service in Manhattan Beach
We work with professional-tier chimney brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield – the same materials specified by certified chimney engineers. We don’t stock parts locally, but we source what the job calls for and keep turnaround tight. That means the cap or crown we install on your Manhattan Beach chimney is sized and specified for the actual flue, not whatever happens to be on a shelf. If a repair can be done in place with the right product, we’ll tell you. If it can’t, we’ll tell you that too.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Manhattan Beach Homes
- Salt-air corrosion of dampers and chase covers. Onshore salt spray off the Pacific rusts metal dampers and chase covers through within a few coastal years. Once that metal fails, the firebox is open to moisture and the marine-layer humidity that hangs over the town.
- Cracked and spalling crowns on older masonry. A beach cottage or ranch home from the 1950s through the 1970s often still has its original single-wythe masonry chimney. Its crown, if it was never rebuilt, lets water wick straight down into the smoke chamber.
- Palm and eucalyptus debris blocking caps. In the dense lots near downtown and the pier, chimneys sit close to neighbors’ rooflines and mature canopy. Palm fronds and eucalyptus litter clog cap screens in a way a typical inland sweep never sees, and the blockage goes unnoticed until the first cool-evening fire.
- Vintage clay-tile flues retrofitted with modern appliances. When a newer gas or prefab unit was added into an older chase, the tighter clearances mean the cap and crown sometimes need replacement rather than repair. Camera evidence is the only honest way to know which.
Pricing for Chimney Cap & Crown in Manhattan Beach, CA
Most cap and crown work in Manhattan Beach falls into a predictable range. A typical single-flue cap installation runs $250 – $550. A multi-flue cap for a larger masonry chimney runs $500 – $1,100, and a custom cap built to an irregular or oversized opening runs $700 – $1,500. Crown repair runs $300 – $700; a full crown rebuild runs $700 – $1,400. Crown coating runs $350 – $650. What moves the number is the flue count, the size and shape of the opening, whether the chase cover is pitted, and whether the crown can be coated or has to be rebuilt. The written estimate sets the final price. Call (866) 490-9807 for an exact quote – estimates are free.
We Also Serve Cities Near Manhattan Beach
Our service area around Manhattan Beach reaches into neighboring towns as well. Homeowners in Lawndale, Hawthorne, Del Aire and Inglewood call us for the same cap and crown work. If your chimney sits in one of those towns, the salt-air and debris patterns are similar, and our chimney cap & crown team can take a look. Call (866) 490-9807 to set up a free estimate.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Manhattan Beach
A bigger cap alone usually isn’t the fix. What helps is a properly sized screen with the right mesh for fibrous debris, plus positioning that keeps the cap clear of overhanging canopy. Larger openings just catch more litter if the screen isn’t matched to it. Call (866) 490-9807 and we’ll look at the actual flue and canopy before recommending anything.
A camera inspection tells you. A coating holds on a crown with hairline cracks but solid structure; a crown that’s spalling to the rebar or breaking apart needs rebuilding, and a coating would just fail underneath. We show you the cracks on-screen so you can decide with the evidence in front of you. Call (866) 490-9807 for a free estimate.
It should cover the crown, the cap and screen, and the damper, and it should document the flue liner. On a 1960s Manhattan Beach cottage, the original clay-tile flue has often cracked or spalled, and a rusted damper leaves the firebox open to moisture. We photograph each of those on the inspection and only recommend further work when the liner condition actually calls for it – not before. Call (866) 490-9807 to set up the inspection.
Yes, and for a different reason than a heavily used fireplace. Chimneys here sit unused for long stretches, and that’s when nests, palm litter and marine-layer moisture settle in. Salt-air corrosion of the damper and cap keeps working whether or not you’re burning. An annual inspection catches that before it becomes a repair. Call (866) 490-9807 for a free estimate.
A multi-flue cap is a single unit that covers several flue openings in one housing, which suits many original masonry chimneys with two or three flues. A custom cap is built to an irregular, oversized or unusual opening that a stock multi-flue cap can’t cover properly. On older Manhattan Beach chimneys, the opening is often out of square enough to need the custom route. We measure and photograph the opening first. Call (866) 490-9807 for an exact quote.
Written by the team at Westchester Chimney Sweep Pros.