Chimney Liner & Rebuild Cost in Westchester - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 490-9807

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Chimney Liner & Rebuild Cost in Westchester?

Chimney liner and rebuild work in Westchester typically runs from about $1,800 to $4,200 for a standard stainless liner installation, and $4,500 to $15,000 or more for a partial or full chimney rebuild. Resurfacing a deteriorated flue with HeatShield usually lands between $1,400 and $2,800, which is why we check whether your flue can be resurfaced before we quote a full reline. Every chimney is different, so the written estimate, not this range, sets your final price.

Westchester is an older Los Angeles neighborhood, and a lot of the housing stock around here was built in the 1940s through the 1960s. That matters for pricing. Chimneys from that era often have clay tile flues that have cracked, spalled, or lost their mortar joints, and many have masonry crowns that have weathered down to a thin cap that no longer sheds water. When we inspect a Westchester chimney, we’re usually looking at two questions at once: can the existing flue be brought back with resurfacing, or does the appliance in the house need a proper liner? The answers drive the number.

If you’d rather just get the number, call (866) 490-9807 and we’ll set up a free estimate. We answer 24/7, and we run fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 15 years of experience, and the local professional who arrives is licensed and insured as the state requires.

Key Takeaways

  • Standard stainless chimney liner installation in Westchester: roughly $1,800 to $4,200, depending on flue height, liner diameter and whether an insulation wrap is needed.
  • HeatShield flue resurfacing: roughly $1,400 to $2,800, and often the cheaper path when the tile is deteriorated but the chimney structure is sound.
  • Partial chimney rebuild (crown, top courses, flashing area): roughly $4,500 to $9,000.
  • Full chimney rebuild from the roofline up: roughly $9,000 to $15,000 or more.
  • Chimney cap and crown work is usually quoted alongside liner jobs, because water intrusion is the leading cause of the damage we find.
  • Estimates are free, and the written estimate sets the final price per job.

Chimney Liner & Rebuild Cost Breakdown (2026)

The figures below are typical ranges for the Westchester market in 2026. They cover the work, the materials, and the standard parts like a top plate, cap adapter and appliance connector.

Line Item Typical Cost Range (Westchester, 2026) What It Covers
Stainless steel chimney liner (standard, gas or wood appliance) $1,800 – $4,200 Flexible liner sized to the flue and appliance, top plate, cap adapter, appliance connection
Insulated liner installation $2,400 – $5,200 Same as above plus insulation wrap, which is often required for oil or for flues in cold, exterior chases
HeatShield flue resurfacing $1,400 – $2,800 Cleaning of the flue, application of HeatShield resurfacing compound over deteriorated clay tile, finishing
Chimney cap installation $350 – $900 Stainless or copper cap sized to the flue, spark screen, mounting
Crown repair or replacement $650 – $2,200 Removing failed crown material, forming and finishing a new crown with proper slope and overhang
Partial chimney rebuild (top section) $4,500 – $9,000 Rebuilding the top courses of masonry, new crown, new flashing, new cap if needed
Full chimney rebuild above the roofline $9,000 – $15,000+ Full tear-down and rebuild of the chimney above the roof deck, new flue, crown, cap and flashing
Full chimney rebuild including below-roof work $15,000 – $25,000+ Rebuild extending through the roofline and into the chase or interior, new liner, crown, cap, flashing
Chimney inspection $0 – $350 Visual and camera inspection of the flue, crown, cap and exterior; usually free or credited when you move forward with a repair

What pushes a job toward the top of a range? Height and access are the big ones. A chimney on a steep-pitch roof or a two-story Westchester house takes longer to work on safely, and that shows up in the price. So does liner diameter: a flue that has to be relined for a wood-burning fireplace insert often needs a larger, heavier liner than a gas appliance, and the appliance connector and top plate change too. Oil appliances usually need insulation wrap, which adds material and labor. On rebuilds, the difference between a partial and a full rebuild comes down to how much of the masonry is actually sound. If the top courses and crown are failing but the masonry below the roofline is solid, a partial rebuild is enough. If the flue tile has collapsed or the chase is water-logged and deteriorating, a full rebuild is the honest answer.

What brings a job toward the low end? A straightforward flue with good access and a chimney that’s structurally sound. That’s the case where HeatShield resurfacing is the right call instead of a full reline. We use the same materials chimney engineers specify, including HeatShield compound, DuraFlex flexible liner systems, Gelco, Olympia Chimney, Famco and Copperfield components, rather than hardware-store substitutes. That matters because a liner is only as good as the fittings that hold it in place.

What Affects Chimney Liner & Rebuild Pricing in Westchester

  • Flue height and roof access. Liners are priced partly by the foot, and more importantly by the labor of getting them down a flue safely. A chimney on a low-slope roof in Westchester is faster to work on than one on a steep-pitch roof or one extending two stories above the roofline.
  • Appliance type. A gas appliance, an oil furnace, a wood-burning fireplace or a wood insert each requires a different liner specification. Gas and wood are the most common here. Oil often requires an insulated liner, which adds to the cost.
  • Condition of the clay flue tile. This is the single biggest fork in the road. If the tile is intact, you may only need a liner. If it’s spalled and cracked but still structurally in place, HeatShield resurfacing can restore it. If it’s collapsed, it has to come out, which pushes the job toward a rebuild.
  • Crown and cap condition. A failed crown lets water into the masonry, and that water damages the flue from the inside. We quote cap and crown work alongside liner jobs because leaving them out just means the same water problem comes back.
  • Masonry and chase condition. Brick that has spalled or lost mortar over decades needs repointing or rebuilding. Westchester’s dry summers and mild, wet winters are hard on masonry that hasn’t been maintained, and a lot of older chimneys here are past due for that attention.
  • Permits and code compliance. Most cities require a permit for chimney rebuilds and, depending on the scope, for liner work. Ask your city’s building department before work starts, because permit costs and inspection timelines vary and can affect the total. We’ll walk you through what’s typically required for your project.

One more factor worth naming: whether you actually need a liner at all. Some Westchester homeowners call because a generalist told them they needed a full reline, when the flue really just needed resurfacing. We’ll tell you what your chimney actually needs, and what it doesn’t. That’s the difference between a $1,400 resurfacing job and a $4,000 reline.

How to Save on Chimney Liner & Rebuild in Westchester

Start with a real inspection, not a quote over the phone. You can’t price a rebuild without seeing the flue, the crown and the masonry, and a phone estimate is a guess. A proper inspection tells you whether the job is resurfacing, a liner, or masonry work, and that one step is often where the biggest savings are, because it keeps you from paying for work you don’t need.

  • Deal with water first. Cap and crown work is far cheaper than a rebuild, and it prevents the water that drives rebuilds. If your crown is cracked and your cap is missing or undersized, fix that before it costs you the masonry.
  • Ask whether resurfacing will do. HeatShield is a real alternative to relining when the tile is deteriorated but the structure is sound. Not every homeowner gets told that, because not every sweep carries it.
  • Bundle cap, crown and liner into one job. Doing them together avoids paying twice for setup and access, and you get a chimney that’s protected from top to bottom in one visit.
  • Get the estimate in writing and compare line by line. Cheaper isn’t the same as less expensive. A quote that skips the top plate, the cap adapter or the insulation wrap will come back around as a second charge.
  • Don’t wait on a partial rebuild. A failing top section is a smaller job than the full rebuild it turns into once water gets past the crown and into the chase.

We offer free estimates, and we price per job with a written estimate, so you know the total before work starts. Call (866) 490-9807 to schedule yours. We answer 24/7.

Should You Repair or Replace Your Chimney Liner?

Repair, in the form of HeatShield resurfacing, is almost always the cheaper route when the clay tile is deteriorated but the chimney structure is sound. Replacement with a full stainless liner, or a rebuild, is the right call when the tile has collapsed, the chase is water-damaged, or the appliance needs a liner spec the existing flue can’t meet.

The way to decide is to look at what’s failing. A cracked flue tile that’s still sitting where it belongs can often be resurfaced. A tile that has fallen apart, or a chimney where the masonry around it has gone soft from years of water intrusion, needs more than a coating. Resurfacing over structural damage just hides the problem for a while. We’ll tell you which situation you’re in, in plain terms, and we won’t push a rebuild you don’t need. You can read more on our chimney liner & rebuild page about how that decision gets made for different appliance types.

Why Choose a Chimney Specialist for Liner and Rebuild Work?

Because liner and rebuild work is the part of chimney service that generalist contractors get wrong. Liner sizing has to match the appliance and the flue; the wrong diameter, a missing insulation wrap or a poorly fitted top plate can hurt performance or create a hazard, and none of that shows up until the first burn of the season. We work with DuraFlex flexible liner systems, which cover gas, oil and wood appliances, and with HeatShield for resurfacing. Those are professional-tier product lines, not retail substitutes, and they’re the same materials chimney engineers specify.

We keep the whole scope inside one company: inspection, sweep, cap and crown installation, fireplace repair, and chimney repair. That means no handoffs and no subcontractors, which matters most on a rebuild, where the liner, the crown, the cap and the masonry all have to work together. Homeowners in Westchester can also read more about our chimney repair work, our chimney inspection service, and our chimney sweep visits, or start at our Westchester Chimney Sweep Pros home page.

One safety note worth saying plainly: flue work and masonry work above the roofline are not homeowner jobs. A chimney handles heat, combustion gases and water, and a liner installed wrong can let gases into the house instead of up the flue. If you notice a cracked flue, a crumbling crown or a collapse, call a trained professional rather than climbing up to look.

FAQs – Chimney Liner & Rebuild Cost

How much does chimney liner installation cost in Westchester?

A standard stainless steel chimney liner in Westchester typically costs $1,800 to $4,200, and an insulated liner runs $2,400 to $5,200. The range depends on flue height, liner diameter, appliance type and access to the chimney. Call (866) 490-9807 for an exact quote; estimates are free.

Is it cheaper to repair or replace a chimney liner?

Resurfacing with HeatShield, typically $1,400 to $2,800, is usually cheaper than a full reline at $1,800 to $4,200 when the tile is deteriorated but the structure is sound. If the tile has collapsed or the masonry is water-damaged, a liner or rebuild is the only honest fix. Call (866) 490-9807 and we’ll tell you which applies to your chimney.

How much does a chimney rebuild cost in Westchester?

A partial chimney rebuild in Westchester typically costs $4,500 to $9,000, and a full rebuild above the roofline runs $9,000 to $15,000 or more. A rebuild that extends below the roofline can reach $15,000 to $25,000 or more. Call (866) 490-9807 for a written estimate on your specific chimney.

Can a chimney liner be installed on a gas, oil or wood appliance?

Yes, and the liner spec changes with each one. Gas and wood appliances are the most common relines we see in Westchester; oil appliances usually need an insulated liner, which lands in the $2,400 to $5,200 range. Our technicians have up to 15 years of experience matching the liner to the appliance. Call (866) 490-9807 to talk it through.

How long does a chimney liner or rebuild take?

A liner installation is usually a single-day job, and HeatShield resurfacing is also typically completed in a day. A partial rebuild generally takes several days, and a full rebuild can take a week or more depending on weather and access. The written estimate will give you a realistic timeline, and you can call (866) 490-9807 to schedule your free estimate.

Get a Free Chimney Liner & Rebuild Estimate in Westchester

If your flue is cracked, your crown is failing, or a generalist told you that you need a full rebuild and you’d like a second opinion, call (866) 490-9807. We answer 24/7, and we run fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, pricing is per job by written estimate, and we’ll tell you what your chimney actually needs, and what it doesn’t. That’s the whole point of calling a chimney specialist: one company from inspection to repair, using professional-grade materials, properly installed.

Pricing reflects the Westchester market as of 2026. Westchester Chimney Sweep Pros offers free estimates – call (866) 490-9807.

Written by the team at Westchester Chimney Sweep Pros.

What Our Customers Say

★★★★★ 4.9 from 9+ reviews

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

- Rohan Sharma

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

- Vivian Park

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

- Veronica Torres
Need Chimney Cleaning help in Westchester? Licensed & insured · free written estimates
Call (866) 490-9807

Request a Free Estimate

Tell us what's going on in Westchester. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Chimney Sweep WestchesterChimney Sweep Marina del ReyChimney Sweep LennoxChimney Sweep Ladera HeightsChimney Sweep InglewoodChimney Sweep Culver CityChimney Sweep View Park-Windsor HillsChimney Sweep Mar VistaChimney Sweep Del AireChimney Sweep El SegundoChimney Sweep HawthorneChimney Sweep VeniceChimney Sweep Manhattan BeachChimney Sweep WestmontChimney Sweep LawndaleChimney Sweep West AthensChimney Cap & Crown WestchesterChimney Cap & Crown Marina del ReyChimney Cap & Crown LennoxChimney Cap & Crown Ladera HeightsChimney Cap & Crown InglewoodChimney Cap & Crown Culver CityChimney Cap & Crown View Park-Windsor HillsChimney Cap & Crown Mar VistaChimney Cap & Crown Del AireChimney Cap & Crown El SegundoChimney Cap & Crown HawthorneChimney Cap & Crown VeniceChimney Cap & Crown Manhattan BeachChimney Cap & Crown WestmontChimney Cap & Crown LawndaleChimney Cap & Crown West AthensFireplace Repair WestchesterFireplace Repair Marina del ReyFireplace Repair LennoxFireplace Repair Ladera HeightsFireplace Repair InglewoodFireplace Repair Culver CityFireplace Repair View Park-Windsor HillsFireplace Repair Mar VistaFireplace Repair Del AireFireplace Repair El SegundoFireplace Repair HawthorneFireplace Repair VeniceFireplace Repair Manhattan BeachFireplace Repair WestmontFireplace Repair LawndaleFireplace Repair West AthensChimney Repair WestchesterChimney Repair Marina del ReyChimney Repair LennoxChimney Repair Ladera HeightsChimney Repair InglewoodChimney Repair Culver CityChimney Repair View Park-Windsor HillsChimney Repair Mar VistaChimney Repair Del AireChimney Repair El SegundoChimney Repair HawthorneChimney Repair VeniceChimney Repair Manhattan BeachChimney Repair WestmontChimney Repair LawndaleChimney Repair West AthensChimney Inspection WestchesterChimney Inspection Marina del ReyChimney Inspection LennoxChimney Inspection Ladera HeightsChimney Inspection InglewoodChimney Inspection Culver CityChimney Inspection View Park-Windsor HillsChimney Inspection Mar VistaChimney Inspection Del AireChimney Inspection El SegundoChimney Inspection HawthorneChimney Inspection VeniceChimney Inspection Manhattan BeachChimney Inspection WestmontChimney Inspection LawndaleChimney Inspection West Athens
Call Now - We Answer 24/7